Page 1 of 1
filler neck hose HELP
Posted: Thu Apr 30, 2009 9:40 pm
by sudec11
Hello all,
I am looking to find a filler neck hose. Ford won't sell just the hose and I haven't had any luck on the internet. Any info would be greatly appreciated.
filler neck hose
1 1/2 inch inside diameter
flexible hose or pre molded for exact fit 92' ford econoline van
1 foot long
1 end has 45 degreee angle to go on tank
THANKS
Posted: Fri May 01, 2009 2:24 pm
by Alaskan
Available at any Marine Supply....flexible fuel hose
Posted: Wed May 06, 2009 12:21 am
by ChasingRain
Interesting, I just noticed today that mine was bad too (my first clue was the big puddle of gas on the ground when I was filling up), and I was just looking around the internet for info on them. Keep me posted on what you find out.
Posted: Thu May 07, 2009 7:28 pm
by jeffreyd426
We found out about this problem on our first fill up july 08.Ford dealer in our small town had the parts,so we had them fix it.Fuel hose,114.47,vent hose,54.98.Labor,158.00.I do alot of repairs on the 190,but im glad i didnt try this one.I think you need to drop the tank to do repair,and my tank was full!
Posted: Fri Jun 19, 2009 1:12 pm
by ChasingRain
I replaced mine- $18 and change for 12 inches of hose and two hose clamps from carquest- I really only needed 11 inches. I just used straight hose, and cut the end on the tank at a bit of an angle- works fine. Took about half an hour to change the hose out, didn't have to drop the tank. As long as you can get a socket or screwdriver onto the hose clamp on the tank, you shouldn't have to drop the tank.
Jeremy