Thank you for the prompt reply.

Yes! it is a royal pain to find and remove. It took all my patience and my wife's small hands to retrieve the mounting bolt I dropped into the bottom of the fender well. Unbelievable that they couldn't find an easier location for a part that is subject to failure ...

I have a 1992 B190 which is does not charge the Auxiliary Battery when the engine is running. I believe the problem may be the Aux battery relay but I can not find it. I assume the relay located behind the driver side headlight is the starter relay. I have checked the 60 amp fuse in the distribution ...

Cliff,
Thanks for the website link. The prices are much better than a few other sources I've found. It's tough to judge quality from web pictures and I wonder about the gauge of metal used. Are you a satisfied customer?
Joel

I would like to replace my vinyl spare tire cover with a hard metal or hard plastic cover. I would like the type with a stainless steel ring and either a hard plastic or metal disc. If anyone has a used one for sale please contact me or if you have purchased one and can recommend a retailer or ...

Mike,
Thanks for your reply and the explanation of what occurs in each switch position is very helpful. I agree that there may be a way to wire in an Automatic Charging Relay that would monitor the voltage of each house bank and distribute charging current accordingly but I'm not sure where it would ...

I am planning to upgrade my Magnetek 6332 with something like the PD4655 however I am adding a second house bank in my B190 RV and will also install a 4 position battery switch and a battery monitor that will monitor both banks. I would like a converter/charger that had separate charging circuits ...

Mike,
I was planning to upgrade my converter to a PD4655 and add a second battery bank under the couch while keeping the original battery under the hood. I also wanted to add a 4 position battery switch so I could choose either battery bank or both as well as turn off all loads. If I understand your ...

I have a 1992 B190 with a Panasonic microwave. I would like to replace the microwave but don't see how to remove it from the compartment above the refrigerator. There seems to be a board under the microwave that prevents it from sliding out but no access that I can see.
Someone asked this question ...