I’m 1998 B190 VIN # 1FDFF34F3WHA56956 per rules for listing.

Thank you! 1998 B190 VIN # 1FDFF34F3WHA56956 per rules for listing.

Extremely clean well maintained 1998 B190. 78,400K miles. Strong Ford E350 V10 Triton no issue whatsoever with the chassis or the coach. Anytime over the years there was an issue I immediately had it fixed professionally. Generator runs strong with 49.4 hours on it (even at 5K altitude). New AGM ...

Thank you . Any and all help greatly appreciated

Babsy (Barbara)

This is the pressure relief valve off my 1998 tank. Does anybody know where I can order a replacement???
Thank you
Barbara

Does anybody’s know if this will fit my original propane tank on my 1998 B 190?

Emerson Fisher 3/4 in. MNPT External Relief Valves for ASME Containers - 250 PSIG


I’d so I can get it in time for my trip. If not sadly won’t be able to use refrig or stove.

Thank you
Barbara

What is the name and size of the fitting to the right of the fill valve in the bottom picture ? I just found out that fitting must be stuck open as I have a small leak even when tank not over filled. I suspect the last person who filled it didn’t know how and he overfilled it. I need to replace it ...

Thank you very much for the reply. I kind of thought I should go ahead and change it anyway. The guy at the same company you ordered from said the 45 kit should fit just like the 6332. He said it’s the whole kit so comes with the entire box that slips in and has new fuse board as well.

Fingers ...

follow up- so the battery was the culprit. With new AGM while plugged in to power my monitor is indicating that it is charging and the fan not running all the time as its not working as hard to try and charge my old AGM.

Is the old Magnetek 6332 converter bad for a new battery? I thought I read ...

If I do have to replace would this one still be the one to get? I found from a post from many many years ago. Would it fit in 1998?

Progressive Dynamics PD9260CV Inteli-Power 9200 Series Converter/Charger with Charge Wizard - 60 Amp

or

Progressive Dynamics PD9245CV Inteli-Power 9200 Series ...

Hello
I have the 1998 B190. I'm trying to figure out if the converter is bad. When plugged into my garage 110 outlet (with plug adapter) the fan is running but the monitor panel is NOT reading Charging. When I have the motor running it DOES read charging.

I have the house battery on a charger but ...

1998 B190
How can I tell if my converter is going bad? How do I do a volt test? I have a brand new AGM battery so assuming that is working strong.
I just plugged in to shore power for first time in a long time and the fan is running ( below fuse box) and it seems to be taking refrigerator longer ...

Update: I'm so happy to report I found the problem. I took the cover off the generator and started it from the outside to see if I could see anything...and sure enough the little black fuel line had separated itself from the other end which was right there in front. So, I just put back in place and ...

DavidP-
I think it might be the line between the generator and the fuel tank. Was that difficult to replace? How did you replace yours?

thanks
Barbara

DavidP-
I think it might be the line between the generator and the fuel tank. Was that difficult to replace?

thanks
Barbara