Can't go anywhere without a working drivetrain
- Seasoned Traveler
- Posts: 194
- Joined: Mon Jan 11, 2010 1:00 am
- B190 Year: 1994
- WBCCI: 0
- Location: Summit County, Colorado
I’m posting this in case someone else has the problem I just had. I was experiencing increasingly sloppy, loose action with the column shifter going into and out of Drive. I had visions of needing to disassemble the whole steering column chasing down the problem, but first I searched online and found that this is a very common problem with old Fords (trucks, Lincolns, small vans, large vans...), and that the fix is super simple. All you need is a #30 Torx screwdriver to tighten up the two bolts that connect the shifter to the linkage, and they are accessible under the steering wheel. Both my bolts were loose; one was getting ready to fall out on the next bumpy ride. Here’s a picture of the scene. The relevant bolts to tighten are in the green circle
I hope someone finds this helpful!
, but I could only get my phone in a position to see one of them. Tighten them both and the column shifter shifts like new. You can find some nice videos on YouTube for more detail.