Propane tank removal
-
- Weekend Camper
- Posts: 58
- Joined: Mon Jan 22, 2018 9:44 pm
- B190 Year: 1996
- Location: Seattle, WA
Re: Propane tank removal
Last photos...still need to fill it and verify everything works, but that's for later!
- Attachments
-
- 06 tank painted.jpeg (3.23 MiB) Viewed 37760 times
-
- 07 front bracket install detail.jpeg (2.58 MiB) Viewed 37760 times
-
- 08 installed tank.jpeg (1.76 MiB) Viewed 37760 times
-
- 09 new tank monitor wire fittings.jpeg (1.64 MiB) Viewed 37760 times
- skater
- Site Admin
- Posts: 2593
- Joined: Thu Mar 08, 2007 1:00 am
- B190 Year: 1991
- WBCCI: 13270
- Location: Annapolis, MD
Re: Propane tank removal
Looks great! I should do that to mine, which isn't nearly as bad as yours was.
1991 Airstream B190 - bought, 2005; sold, 2011; bought 2017
1995 Airstream Excella 30' trailer
WBCCI #13270, Washington, DC Unit
1995 Airstream Excella 30' trailer
WBCCI #13270, Washington, DC Unit
- Oldbagpipe
- Seasoned Traveler
- Posts: 149
- Joined: Tue Dec 22, 2015 9:05 pm
- B190 Year: 1989
- WBCCI: 0
- Location: PNW
Re: Propane tank removal
Nicely done! This is on my 'list', but still a ways down. I'll be back to this thread when ready. Thank you
Re: Propane tank removal
Very nice!
A bit anal repainting a tank no one will see because of a few scratches, though, no?
A bit anal repainting a tank no one will see because of a few scratches, though, no?
Re: Propane tank removal
Branden - sorry for the very late reply, but I only just saw your question. It's probably a moot point by now, but the work was done at Allied Propane in Richmond, CA.silvertrooper wrote: ↑Thu Mar 24, 2022 6:41 pmHey Rugster,
Who did you have do the work? I've got a similar problem with a leaking shut-off valve, and LP places say they won't work on the chassis-mounted tank, and RV places say they don't do LP, or it's too old (1996) for their shop.
I'm now just thinking about doing the work myself--looks fairly easy since the tank is empty. Problem is, I don't know what valve to use. I suppose I cold just remove it then see if I can match it...
Thanks for any tips!
Branden and the Tourtle
Re: Propane tank removal
What is the name and size of the fitting to the right of the fill valve in the bottom picture ? I just found out that fitting must be stuck open as I have a small leak even when tank not over filled. I suspect the last person who filled it didn’t know how and he overfilled it. I need to replace it but don’t know exact name and model of the part. Any help greatly appreciated????
Barbara
Barbara
Re: Propane tank removal
Does anybody’s know if this will fit my original propane tank on my 1998 B 190?
Emerson Fisher 3/4 in. MNPT External Relief Valves for ASME Containers - 250 PSIG
I’d so I can get it in time for my trip. If not sadly won’t be able to use refrig or stove.
Thank you
Barbara
Emerson Fisher 3/4 in. MNPT External Relief Valves for ASME Containers - 250 PSIG
I’d so I can get it in time for my trip. If not sadly won’t be able to use refrig or stove.
Thank you
Barbara
Re: Propane tank removal
This is the pressure relief valve off my 1998 tank. Does anybody know where I can order a replacement???
Thank you
Barbara
Thank you
Barbara
- Attachments
-
- Pressure relief valve
- imagejpeg_0.jpeg (154.4 KiB) Viewed 36905 times
-
- Pressure relief valve
- imagejpeg_0.jpeg (161.49 KiB) Viewed 36905 times
-
- Pressure relief valve
- imagejpeg_0.jpeg (145.05 KiB) Viewed 36905 times
-
- Pressure relief valve
- imagejpeg_0.jpeg (226.96 KiB) Viewed 36905 times