1999 Flooring question

Make it comfortable inside
Post Reply
8Track
Weekend Camper
Posts: 17
Joined: Fri Jan 05, 2018 12:11 pm
B190 Year: 1999
WBCCI: 0
Location: Nashville, Tn

1999 Flooring question

Post by 8Track » Fri May 04, 2018 7:25 pm

I have 1999 and was planning on replacing the carpet with stick-on laminate flooring this weekend. I decided that instead of gutting the entire interior, I would just cut the carpet around the cabinets, bench, etc. and glue the new flooring on top of the subfloor. Easy enough right? I assumed that there was a plywood or OSB subfloor underneath the carpet but when I peeled back a section near the bathroom I found that its just really thick foam under the carpet with no subflooring at all. It's really thrown a wrench into my plans and I'm racking my brain trying to come up with a new solution. It's not a huge issue, it's just that this project is going to cost more than I was planning on spending. Is this typical for late model 190's? Has anyone else run into this problem and figured out a good solution? I searched the forums and from what I can tell, the early 190's had a plywood subfloor :?:
Image

User avatar
usachris
Seasoned Traveler
Posts: 182
Joined: Sun Mar 12, 2017 5:31 pm
B190 Year: 1999
WBCCI: 1422
Location: Costa Mesa, California

Re: 1999 Flooring question

Post by usachris » Fri May 04, 2018 8:15 pm

It seems like an option you already know would be to remove the carpet and Dynamat - that’s the layer of insulating/soundproofing - from the areas you want to add the new flooring. Then glue in a subfloor - the same thickness as the Dynamat - and install your new flooring on top. Take care with your measurements so the finished flooring is the same height of the existing carpet.

I know you dont want to gut the interior but hopefully these shots from my ‘99 renovation might be of interest.
03C9FAC5-A81A-460D-9632-22D2F464CBC9.jpeg
Stripped bare!
03C9FAC5-A81A-460D-9632-22D2F464CBC9.jpeg (106.66 KiB) Viewed 532 times
9E0F7F74-B32F-4BC9-A3F7-CFEC7782B3B6.jpeg
Use lots of strong glue.
9E0F7F74-B32F-4BC9-A3F7-CFEC7782B3B6.jpeg (112.13 KiB) Viewed 532 times
33F33DF1-6312-4D32-8EC2-4FE14B9F89B1.jpeg
And put it all back together! So easy :)
33F33DF1-6312-4D32-8EC2-4FE14B9F89B1.jpeg (118.56 KiB) Viewed 533 times
Christopher Salazar
1999 B190 #301352
WBCCI #01422 Region 12, Unit 19

8Track
Weekend Camper
Posts: 17
Joined: Fri Jan 05, 2018 12:11 pm
B190 Year: 1999
WBCCI: 0
Location: Nashville, Tn

Re: 1999 Flooring question

Post by 8Track » Fri May 04, 2018 11:11 pm

Oh wow! Thanks Chris. You did a damn good job man! Those photos have definitely provided inspiration towards my project. Did you put any insulation down between the subfloor and the floor of the van? If not, have you noticed any difference in road noise or having any issues with heating or cooling? Also, where'd you score those window shades? Looks sharp!

User avatar
usachris
Seasoned Traveler
Posts: 182
Joined: Sun Mar 12, 2017 5:31 pm
B190 Year: 1999
WBCCI: 1422
Location: Costa Mesa, California

Re: 1999 Flooring question

Post by usachris » Sat May 05, 2018 12:44 am

Thanks! The wife was really the one calling the shots on the interior. I got to handle the transmission cooler, expanded battery bank, new tire and suspension mods, and all other exterior and under the hood upgrades ;)

After several trips with the new flooring, we think it’s quieter with the wood subfloor than with the Dynamat and carpet. We never used the heating and cooling much with the carpeting in it, but we’re really enjoying it now with the wood subfloor and rubber tile flooring. Heating is very nice, cooling is great, and cleanup is a breeze. No additional insulation was added to the wood subfloor.
A8CA022A-C94F-436B-A676-24C1685C31DF.jpeg
Wood subfloor going in.
A8CA022A-C94F-436B-A676-24C1685C31DF.jpeg (111.59 KiB) Viewed 517 times
E98DCFCA-3474-46BB-8B02-9B2D43DDC2EC.jpeg
Rubber tiles arranged and test fitted before gluing down.
E98DCFCA-3474-46BB-8B02-9B2D43DDC2EC.jpeg (153.79 KiB) Viewed 517 times
My wife picked out the material for the blinds, matched it with some wonderful blackout liner, and had them custom-made to fit all the windows in the van. Really a nice touch that I couldn’t have imagined.
FEB4466B-90D4-4C87-98B3-4054F01F8DC2.jpeg
New curtains with blackout liner for all the windows.
FEB4466B-90D4-4C87-98B3-4054F01F8DC2.jpeg (97.26 KiB) Viewed 517 times
Christopher Salazar
1999 B190 #301352
WBCCI #01422 Region 12, Unit 19

User avatar
Kentuckian
Seasoned Traveler
Posts: 341
Joined: Sun Sep 30, 2012 3:52 pm
B190 Year: 1993
WBCCI: 0
Location: Kentucky, USA

Re: 1999 Flooring question

Post by Kentuckian » Sat May 05, 2018 8:30 am

Chris,
Impressive job. I can appreciate how much work went into that rebuild. The results are very nice. WTG!
1993 Airstream B190 w/1991 Chevrolet Tracker tow car

User avatar
190-b-651
Seasoned Traveler
Posts: 311
Joined: Fri Jun 03, 2016 4:35 pm
B190 Year: 0
WBCCI: 0

Re: 1999 Flooring question

Post by 190-b-651 » Fri May 11, 2018 10:42 am

Wow Chris nice job its beautifully done.

Sent from my SM-J727T1 using Tapatalk

Post Reply